1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Idle too HIGH..

Discussion in 'General Tech and Maintenance' started by Arrogant_, Aug 8, 2005.

  1. Arrogant_

    Arrogant_ Member

    Messages:
    41
    Likes Received:
    0
    Joined:
    Jan 10, 2005
    Vaccum is leaking and I don't know where it's leaking from.

    I don't see why it's idling so high. I just replaced the head-gasket. I removed all the necessary hoses and connectors on the intake manifold and had carefully put them back on.

    What might seem to be the problem?


    Any assistance would be appreciated.
     
  2. VTECPOWER

    VTECPOWER Senior Member

    Messages:
    1,683
    Likes Received:
    0
    Joined:
    Oct 6, 2003
    Location:
    Winchester, VA
    Vaccum leak in the lines? leaky gasket? adjust throttle cable?
     
  3. reikoshea

    reikoshea HS Troll...And Mod Moderator VIP

    Messages:
    12,633
    Likes Received:
    193
    Joined:
    Apr 27, 2005
    Location:
    San Antonio, TX
    tis true. i was changing out my thermostat and flushing my radiator this weekend (MY CAR STILL SHOWS OVERHEATING), and i got SOOO PISSED cause i saw what i thought was a CUT vacuum line. So i got the number off the line, and i saw that it was supposed to connect to the Intake mani. I connected it, and my 2000 RPM idle went to 600...adjusted my screw and now its perfect....god bless hayes manuals.
     
Verification:
Draft saved Draft deleted

Share This Page