1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

im putting a 96 LS in my 97 civic ex!

Discussion in 'HYBRID -> EG-EK / DC' started by chikntoe2002, Nov 7, 2004.

  1. chikntoe2002

    chikntoe2002 Junior Member

    Messages:
    4
    Likes Received:
    0
    Joined:
    Jul 23, 2004
    im putting a 96 b18b1 (ls) in my 97 civic ex....and im using my d-series harness and injectors and all that good stuff....but i headr from one of my friends that did the same swap in his car that i need to take the IAT and crank angle sensors from the LS harness and put them on my d-series harness....so that my d-series will clip righ tin to place?? is this true???

    and another question....and is the crank angle sensor and the crankshaft position/top dead center/cylinder position sensor the same thing???

    and where is the IAT at on my ex motor? i got the haynes manual but the pics arent very clear?? thanks in advance and please.....

    if you want to kno more or would liek to tell me something

    AIM me on CHIKNtoe2002@
     
  2. average_boost

    average_boost Junior Member

    Messages:
    3
    Likes Received:
    0
    Joined:
    Nov 7, 2004
    i think the sensor is under the underdrive pulley, near the timing belt. i think* :unsure:
     
  3. chikntoe2002

    chikntoe2002 Junior Member

    Messages:
    4
    Likes Received:
    0
    Joined:
    Jul 23, 2004
    ok i found the IAT but still have no clue about the crank angle stuff....so help please
     
Verification:
Draft saved Draft deleted

Share This Page