1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

info on cranshaft

Discussion in 'Engine Building' started by sierra305, Jun 18, 2016.

  1. sierra305

    sierra305 New Member

    Messages:
    5
    Likes Received:
    0
    Joined:
    Jun 18, 2016
    hi looking to see if this possible and what i need to do this i have 94 jdm b18c gsr and my crank bearing let go damage on of the rod on the cranshaft and would like to if this will be the same it b18c type r cranshaft 96 please someone let me know if thre the same
    thank you
     
  2. E_SolSi

    E_SolSi Member of the 20 nut club Moderator VIP

    Messages:
    30,018
    Likes Received:
    3,948
    Joined:
    Sep 28, 2002
    Location:
    CT
    the type r crankshaft is a bit heavier (larger counter balances) but size/stroke wise they are essentially the same
    should be no problem running the ITR crankshaft
     
  3. sierra305

    sierra305 New Member

    Messages:
    5
    Likes Received:
    0
    Joined:
    Jun 18, 2016
    Hi I have found this one but not sure if a gsr says c3 fallow 3 and 4 also letter c near the flywheel side
     
  4. sierra305

    sierra305 New Member

    Messages:
    5
    Likes Received:
    0
    Joined:
    Jun 18, 2016
  5. sierra305

    sierra305 New Member

    Messages:
    5
    Likes Received:
    0
    Joined:
    Jun 18, 2016
    please let me know what this is for crankshaft so i can put the motor back together thank you
     
  6. sierra305

    sierra305 New Member

    Messages:
    5
    Likes Received:
    0
    Joined:
    Jun 18, 2016
    20160624_181316.jpg 20160624_181316.jpg 20160624_181307.jpg 20160624_181250.jpg Hi looking to see what crankshaft this is I was told it was gsr but I tried every were to see what it is
     
Verification:
Draft saved Draft deleted

Share This Page