1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Information needed

Discussion in 'HYBRID -> EG-EK / DC' started by Teambypass, Apr 14, 2004.

  1. Teambypass

    Teambypass Senior Member

    Messages:
    281
    Likes Received:
    0
    Joined:
    Mar 15, 2003
    Hi guys, I can do my own swap, but information is what I am after.
    I have my completed 96 cx hb motor laying around(74k) and my younger sister needs a car, so instead of buying her an over milleage car which going to cost her around $4-5g, I'd found this 92 hatch that has good condition and bad motor so, I thought if its doable, I will just buy this hatch and drop my old motor in.

    I understand that the motor and the car are different in OBD and from what I understand that I need to make it works are:

    1. get the wireharness addater for OBD2 to OBD1.

    Any other things that I need such as mounts, axels(would my stock axels fit in the older chaisic?)
     
  2. xj0hnx

    xj0hnx I wanna be sedated VIP

    Messages:
    14,172
    Likes Received:
    48
    Joined:
    Nov 10, 2002
    Location:
    C.C.TX.
    Step one, goto junkyard, and get a 92-95 complete intake manifold and ECU (hopefully you can find a CX one, if not use a DX and get the four wire o2 also), and wiring harness, bolt it onto your motor, drop in your motor, plug in harness.
     
  3. mikez

    mikez Member

    Messages:
    34
    Likes Received:
    0
    Joined:
    Feb 10, 2004
    Location:
    New York
    the old axles will fit also
     
  4. Teambypass

    Teambypass Senior Member

    Messages:
    281
    Likes Received:
    0
    Joined:
    Mar 15, 2003
    thanks guys, this will be a great present for her graduation when iam done with this swap.
     
Verification:
Draft saved Draft deleted

Share This Page