Injectors

[jamesA]

Ok so I'm buildin my B16 turbo. I have already sourced and priced out these parts:

a. Walboro 255lp/h pump
b. AEM 25-103C rail
c. AEM 25-300C pressure regulator

1. Will these suffice in my plans of a 6-7 psi b16 turbo motor?

2. What kind of injectors should I nab to compliment these? Are DSM injectors really the answer? (since only one person answered my other thread with that)

3. If the answer to #1 is no, what kind of setup should I be looking for?

Thanks Y0.

 

[beerbongskickass]

a. Not needed for your 6-7 psi goals, but it's always a good idea to upgrade the fuel pump.
b. The stock fuel rail will be fine.
c. The stock fuel pressure regulator will be fine.

DSM 450cc injectors should do the trick and they will be cheap. They are good to about 300whp so they will work well for your goals. What kinda of fuel management will you be running? I suggest looking into Uberdata if you haven't already. I am running uberdata and DSM 450cc injectors on my stock d16z6 making 216whp/181tq at 10 psi.

 

[jamesA]

I was thinking a hondata ecu along with a boost and vtec controller.

 

[beerbongskickass]

Hondata will work just fine, but I would at least look into uberdata first. It's does the exact same thing hondata does, but it's free...

http://www.ecimulti.org/uberdata/

 

[jamesA]

sweet. Thanks.


Nice avatar btw

 

[MaaseyRacer]

I thought you were getting the Edelbrock kit, if you are the kit comes with a new rail and injectors....
http://edelbrock.com/automotive/sport_comp...components.html
shit man it is 50 state legal, it is getting more tempting...

 

[jamesA]

Prolly shoulda looked at that again before thinking more and more about this...

:hide:

 

[turboB20hatch]

Originally posted by beerbongskickass@Apr 28 2004, 07:10 AM
I am running uberdata and DSM 450cc injectors on my stock d16z6 making 216whp/181tq at 10 psi.

damn thats more than respectable from a dseries