1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Integra Xsi motor/transmission into '91 DX DPFI EF chassis

Discussion in 'HYBRID -> ED-EF / DA' started by DR DOMINUS, Jan 30, 2010.

  1. DR DOMINUS

    DR DOMINUS New Member

    Messages:
    4
    Likes Received:
    0
    Joined:
    Jan 30, 2010
    Currently driving a K swapped '98 EJ cx. Have had a bone stock '91 dx auto for quite some time, and recently acquired a B16a motor/tranny out of an Integra Xsi. Did some searches on B16 auto tranny swaps into EF chassis, but no detailed information was ever given.

    Basically need information as to what type of physical modification is necessary to drop a larger, B-series automatic transmission out of a DA chassis Integra, into an EF chassis. Aside from the physical, there is also the question of wiring. The stock DX DPFI harness can be converted to MPFI VTEC with little problem for a manual gear box, but not much information, if any, is available for automatic transmission.

    Any information relevant to the topic is welcome.
     
  2. DR DOMINUS

    DR DOMINUS New Member

    Messages:
    4
    Likes Received:
    0
    Joined:
    Jan 30, 2010
    See people mentioning automatic B swaps on other posts, but no one giving any information as to what steps to go about doing so.
     
Verification:
Draft saved Draft deleted

Share This Page