1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Intermediate Shaft

Discussion in 'HYBRID -> BA-BB /CA-CD' started by project_accord, Jun 5, 2003.

  1. project_accord

    project_accord Member

    Messages:
    42
    Likes Received:
    0
    Joined:
    Mar 25, 2003
    i was just wondering if i could use the prelude intermediate shaft on my 96 accord i am doing a h22a auto to manual swap and the motor came with a intermediate shaft so i was hoping i could use it.
     
  2. dohcvtec_accord

    dohcvtec_accord WRX Sellout

    Messages:
    8,433
    Likes Received:
    1
    Joined:
    Sep 29, 2002
    Location:
    The left lane
    So to clarify...you've got an automatic 96 Accord, and you're dropping in a 5-speed H22A?

    If that's the case, use the Prelude halfshaft that came with the engine.

    If memory serves, the bolt patterns on the intermediate shafts are not the same. The LENGTH of the shaft is the same, so if you did some drilling to the Accord shaft, you could make it work.
     
  3. project_accord

    project_accord Member

    Messages:
    42
    Likes Received:
    0
    Joined:
    Mar 25, 2003
    ok thanks for the info i thought it would work but i was unsure and i have seen info saying to use the accord halfshaft, but if the prelude one is the same length then that is one less thing i have to buy. :D
     
  4. dohcvtec_accord

    dohcvtec_accord WRX Sellout

    Messages:
    8,433
    Likes Received:
    1
    Joined:
    Sep 29, 2002
    Location:
    The left lane
Verification:
Draft saved Draft deleted

Share This Page