1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

internal actuator

Discussion in 'Forced Induction' started by darwins_vtech, Jun 19, 2004.

  1. darwins_vtech

    darwins_vtech Senior Member

    Messages:
    250
    Likes Received:
    0
    Joined:
    Jun 4, 2003
    Location:
    Wisconsin
    hey guys, i am running the internal wastegate actuator on my T3. I bought a new one cause the arm on the old one was bad. I have a problem though. the old actuator had one spot for a vacum line to be hooked up on the canester end. the new one has two spots for vacumlines. what do wach of them hook up to? they are right on top of each other. the canester has like a beveled center. one vacum is on the top side of the canester. and the other is on the bottom side of the bevel. I know one goes to the compressor housing, does the other go into a vacum line or what?. which one goes where though? I bought the actuator off of atpturbo.com you can look at the pic on their website to see what it looks like. I don't have a digital camera myself. thanks, plz help soon.

    Darin
     
Verification:
Draft saved Draft deleted

Share This Page