Hey guys,
Yes I have done a LOT Of searching and for some reason I still cant resolve this problem.
P06 Chipped to P28 w- Vtec.
Vtec engage - 4600, Disabled Knock sensor.
No CEL Codes.
Vtec oil pressure sensor to D6
Ground to Chassis
Vtec solenoid to A4
Oil is topped up, no dents in oil pan..
I checked the Solenoid & It clicks when I give it 12V. ALso, changed ito ut for a new solenoid, also clicked, new filter, gasket, etc.
I wired a Test-Light to A4 and it never lights up, at any rpm. Vtec is clearly not engaging.
Any help, thanks guys
Yes I have done a LOT Of searching and for some reason I still cant resolve this problem.
P06 Chipped to P28 w- Vtec.
Vtec engage - 4600, Disabled Knock sensor.
No CEL Codes.
Vtec oil pressure sensor to D6
Ground to Chassis
Vtec solenoid to A4
Oil is topped up, no dents in oil pan..
I checked the Solenoid & It clicks when I give it 12V. ALso, changed ito ut for a new solenoid, also clicked, new filter, gasket, etc.
I wired a Test-Light to A4 and it never lights up, at any rpm. Vtec is clearly not engaging.
Any help, thanks guys