1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

jdm ecu and harness in usdm ek hatch

Discussion in 'ECU's, Electronics, and Tuning' started by 96 Bahamas Hatch, Apr 18, 2007.

  1. 96 Bahamas Hatch

    96 Bahamas Hatch Junior Member

    Likes Received:
    Feb 12, 2005
    i live in the bahamas , no emisions where i live so i putted the jap ecu and harness in my d16 setup its stock , i had to use the jap dizzy wit it to make it work becus the dizzy is 7 wire and the american is 10 wire , at first i putt the jap dizzy in wrong car wudnt start fo shyt , so when i finally realized it was in the wrong position i putted it in the right , it started , but the thing is when the engine is cold it starts after a nice lil drive and when i cut off and go back to cut it on it wont start it will keep kickin over but if i leave it when it cools down the car wud start did i fcked anything in the dizzy is it a dizzy problem , sum 1 help me plzz
Draft saved Draft deleted

Share This Page