1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Jdm Type R Pulley?

Discussion in 'Engine Building' started by Slimtadder, Feb 17, 2003.

  1. Slimtadder

    Slimtadder Senior Member

    Messages:
    148
    Likes Received:
    0
    Joined:
    Sep 29, 2002
    Location:
    Lake Havasu City, AZ.
    Is there any difference between a USDM and a JDM Crank pulley or even better a JDM Type R crank pulley? I really want to stay away from the under-drive pulley's.

    Thanks Guys
     
  2. chet

    chet Senior Member

    Messages:
    888
    Likes Received:
    0
    Joined:
    Sep 30, 2002
    Location:
    st petersburg, florida
    ctr pulley is designed to just run the alternator belt.

    powersteering and ac are eliminated.

    i'd stay away from aftermarket pulley's because it will throw off the harmonic balance of your engine. honda designs the motor to be perfectly balanced from the factory which means a lightened pulley will change that balance.
     
  3. chet

    chet Senior Member

    Messages:
    888
    Likes Received:
    0
    Joined:
    Sep 30, 2002
    Location:
    st petersburg, florida
    theoretically, the ctr pulley would do the same, as other honda motors are designed to run all three pulley's.

    i'd keep it stock and make power elsewhere.
     
Verification:
Draft saved Draft deleted

Share This Page