just started b16a swap have a question

We may earn a small commission from affiliate links and paid advertisements. Terms

E

ekkosan

Junior Member
I just got a jdm b16a for 600 bucks, and I just found out I need more parts.
i am trying to put it into a 90 civic hatch that was a dx model. i am looking to get a tranny but i need to know, do i just get matching year integra axles? and do i need a half axle?
the engine came with a wiring harness, so can I use it (also has ecu) or do i need to keep the dx harnes and mod it?
thanks:confused: :confused: :confused:
 
Hey I just did this swap...

I used 90 B18A1
90 tranny
90 Integra LS Axles and halh shaft/axle (bolt into dx hub after you remove the dust rings)
You can use any B series tranny just get the matchign axles...
(put new axle seal in before you install teh tranny.. trust me...)

90 Integra ECU

90 Integra Resistor box

I used my DX harness and modded it... you'll need parts off the integra harness.. like the injector plugs... etc...

I'm still workignon mine but if you get stuck drop my a e-mail aaron@agmotorsports.net
 
You must log in or register to reply here.
Back
Top