1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

L3 ZC Tranny axles

Discussion in 'Civic and CRX - EW' started by krackerhymen, Jun 15, 2008.

  1. krackerhymen

    krackerhymen New Member

    Messages:
    1
    Likes Received:
    0
    Joined:
    Jun 15, 2008
    i have a civic with a ZC engine and a L3 tranny we just put in this weekend and now the axles dont work i already jimmy rigged the clutch and pressure plate because the L3 mainshaft has 21 teeth and my old clutch had 20 so what am i doing wrong and how do i fix this prob????? Thanks Guys
     
  2. phunky.buddha

    phunky.buddha Admin with a big stick Admin VIP

    Messages:
    28,465
    Likes Received:
    228
    Joined:
    Sep 30, 2002
    Location:
    Dallas / Fort Worth, TX
    Match the pressure plate to the flywheel, and match the disc to the transmission.

    For the axles, if you're using the ZC transmission with the intermediate shaft, you want the 90-93 Integra axles.
     
  3. hosmer

    hosmer I made the millionth post VIP

    Messages:
    3,162
    Likes Received:
    82
    Joined:
    Jan 26, 2005
    Location:
    B R I D G E W A T E R
    you've got an 88 tranny, you need an 89-91

    -all the 89-91's have 20 splines on the input shaft
     
  4. phunky.buddha

    phunky.buddha Admin with a big stick Admin VIP

    Messages:
    28,465
    Likes Received:
    228
    Joined:
    Sep 30, 2002
    Location:
    Dallas / Fort Worth, TX
    Or you can do what I said. It works.
     
Verification:
Draft saved Draft deleted

Share This Page