1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Lightening z6 flywheel

Discussion in 'Engine Building' started by hondadude199, Aug 17, 2003.

  1. hondadude199

    hondadude199 New Member

    Messages:
    116
    Likes Received:
    0
    Joined:
    Dec 25, 2002
    I have a z6 flywheel lying around and thought about lightening it, about how much will it cost, and how much more performance will i get out of it? I/E are the only mods on the car
     
  2. SleEPeR_CRX

    SleEPeR_CRX Senior Member

    Messages:
    1,226
    Likes Received:
    0
    Joined:
    Dec 22, 2002
    Location:
    Vancouver B.C. canada
    i have a normal LS flywheel in my crx, a 14lb one ready to go in. i drove my friends LS civic with i/h/e, and a lighter flywheel, it is noticable, nothing HUGE, but its nice to get the rev's up faster tho, and since u are probably using the z6 head, or full engine, ull want that so it gets u into vtec faster, without alot of torque, i say go for it. mine only costed 70 bucks cause i bought it from a friend, should only cost like 100 in a shop.
     
  3. JDMilan

    JDMilan Senior Member

    Messages:
    6,730
    Likes Received:
    0
    Joined:
    May 11, 2003
    Location:
    Boca Raton, FL
    if you do it, make sure it gets balanced. I know on b series you don't want to go lower on than 12lbs on the stocker.



    Milan
     
  4. hondadude199

    hondadude199 New Member

    Messages:
    116
    Likes Received:
    0
    Joined:
    Dec 25, 2002
    Thanks for the replies...think ill call the machine shop tomarrow and see how much it will cost and go from their
     
  5. red95solsi

    red95solsi Senior Member

    Messages:
    306
    Likes Received:
    0
    Joined:
    Jan 8, 2003
    Location:
    Kansas City Missouri
    when i lightned mine on the del sol i gained about .1 in the 1/4
     
Verification:
Draft saved Draft deleted

Share This Page