1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

little help please clutch and flywheel

Discussion in 'HYBRID -> ED-EF / DA' started by flippinmystic, Dec 25, 2003.

  1. flippinmystic

    flippinmystic Junior Member

    Messages:
    8
    Likes Received:
    0
    Joined:
    Sep 1, 2003
    have an 89 crx si with sohc cam zc swap ordered a flywheel off of ebay its for 1.5 and 1.6 sohc and zc dohc cam. I have the stock si trans by the way. Then i orderd a clutch from nopi centerforce dual friction for the same car while the flywheel is to big for the pressure plate or the other way around please help me.

    http://cgi.ebay.com/ebaymotors/ws/eBayISAP...item=2444140115
     
  2. flippinmystic

    flippinmystic Junior Member

    Messages:
    8
    Likes Received:
    0
    Joined:
    Sep 1, 2003
    ttt
     
  3. jlicrx

    jlicrx Senior Member

    Messages:
    1,891
    Likes Received:
    65
    Joined:
    Jun 5, 2003
    Location:
    Colorado Springs
    89 CRX Si uses a 200mm diameter clutch with 20 spline disc - 90-91 uses 212mm diameter clutch with 20 spline disc - the flywheel appears to be for the 212mm clutch
     
  4. flippinmystic

    flippinmystic Junior Member

    Messages:
    8
    Likes Received:
    0
    Joined:
    Sep 1, 2003
    can i use that flywheel on my car with the 90-91 clutch or am i screwed. I am such an idiot
     
  5. jlicrx

    jlicrx Senior Member

    Messages:
    1,891
    Likes Received:
    65
    Joined:
    Jun 5, 2003
    Location:
    Colorado Springs
    yes, you can use that flywheel with 90-91 clutch - you could use the 89 disc with 90-91 pressure plate, also
     
  6. flippinmystic

    flippinmystic Junior Member

    Messages:
    8
    Likes Received:
    0
    Joined:
    Sep 1, 2003
    alright so that flywheel will fit in my 89 trans and all i have to do is get an 90-91 clutch kit you are amazing
     
Verification:
Draft saved Draft deleted

Share This Page