1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

looked and dont understand.....

Discussion in 'HYBRID -> EG-EK / DC' started by sireg, Aug 2, 2004.

  1. sireg

    sireg Senior Member

    Messages:
    278
    Likes Received:
    0
    Joined:
    Jul 26, 2004
    still not sure how to check what codes my car is throwing
    also i know i need to wire in a knock sensor but dont know where to wire it into.

    b16a sir2 swap into my eg (94 ex) i used the stock harness
     
  2. xj0hnx

    xj0hnx I wanna be sedated VIP

    Messages:
    14,172
    Likes Received:
    48
    Joined:
    Nov 10, 2002
    Location:
    C.C.TX.
    [​IMG]

    Run a wire from the knock to D3 on the ECU.

    For the CEL, use a paperclip in between the two terminals on the service connector with the key off, then turn the key to accessory, and you'll get a series of flashs, those will indicate the code.
     
  3. sireg

    sireg Senior Member

    Messages:
    278
    Likes Received:
    0
    Joined:
    Jul 26, 2004
    thanks for your help :thumbsup:
     
  4. asmallsol

    asmallsol Super Moderator

    Messages:
    8,074
    Likes Received:
    3
    Joined:
    Sep 28, 2002
    Location:
    Houghton/Livonia Michigan
    John, WTF is up with that Pic. Good resorce, but its all riced out lol
     
  5. pissedoffsol

    pissedoffsol RETIRED

    Messages:
    49,693
    Likes Received:
    53
    Joined:
    Sep 28, 2002
    Location:
    Retirement Home
    lol indeed- but i added it to the car public image gallery anyway :)
     
  6. xj0hnx

    xj0hnx I wanna be sedated VIP

    Messages:
    14,172
    Likes Received:
    48
    Joined:
    Nov 10, 2002
    Location:
    C.C.TX.
    Hahaha, one of the guys on another board made it up, I likey :)
     
Verification:
Draft saved Draft deleted

Share This Page