1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

lookin for suggestions

Discussion in 'HYBRID -> EG-EK / DC' started by OKCZombie, Mar 4, 2008.

  1. OKCZombie

    OKCZombie Banned

    Messages:
    124
    Likes Received:
    0
    Joined:
    Jan 10, 2008
    so I have a nice little issue - got a b16 tranny off a guy - he had cut his linkage or broke it or somethin - but bitch pin essentially ended up hollowed out and roughed on bottom not wanting to come out - I have an air hammer and various punches (all tapered none that are exactly what I need) - what is easiest way to get a messed up bitch pin out of a tranny?

    heard about some methods pushing it from top or bottom using c clamp - or maybe use one of the reverse drill bits to pull it? give me some other ideas cuz I can't get it out with my punches through the bottom it seems.
     
  2. LS_VTEC

    LS_VTEC you get the BRAKE

    Messages:
    2,616
    Likes Received:
    25
    Joined:
    Dec 11, 2007
    Location:
    NJ
    Try a smaller punch and a hammer. That usually works for me. If for some reason that doesn't work, try heating it up and than use your punch to try and get it out again. If still nothing, take it to a machinist and have them get it out. They usually have special tools and tricks for problems such as yours.
     
  3. OKCZombie

    OKCZombie Banned

    Messages:
    124
    Likes Received:
    0
    Joined:
    Jan 10, 2008
    yeah cuz at this point I give it 1-2 more shots if not trading it off for a gsr tranny - and really hate to pull my tranny back out of this car - will try those later - thanks dude
     
  4. ernesttex1

    ernesttex1 New Member

    Messages:
    33
    Likes Received:
    0
    Joined:
    Jun 28, 2007
    Location:
    Vista, ca.
    Suggestions, HOW BOUT RETURNING MY $$$!!!

    HEY OKCZombie, where the hell is my P28 ECU I paid you for via PayPal over a month ago? WTF!!! I been emailing you and emailing you with no response? WTF!!! What seems to be the hold up??? STOP avoiding me and send me a email!!! Or better yet, how bout a fukcing refund!!!
     
  5. eg6dx97

    eg6dx97 New Member

    Messages:
    33
    Likes Received:
    1
    Joined:
    Feb 25, 2007
    yaaa ull pry have to take it apart its not that hard to do tho my and my dad took mine apart when we had to get a special tool for the snap rings but other than that it was pretty easy to do.. its just important that you keep track of how every thing goes in u probably will need to take some of the gears out of the gearbox to get to the shifter levers inside but they come out easyily its just a littly tricky to get them back in but if u want to do it for sure with no messups i suggest taking it to a specialist but if u want to do a puzzle.. the transmission most def is like those 3d puzzles sorta lol
     
Verification:
Draft saved Draft deleted

Share This Page