1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

LS swap EK, problems

Discussion in 'HYBRID -> EG-EK / DC' started by Matts96HB, Jun 25, 2007.

  1. Matts96HB

    Matts96HB . Moderator VIP

    Messages:
    6,483
    Likes Received:
    390
    Joined:
    Apr 16, 2006
    Today I got the LS hatch out for a spin. I haven't driven it since the week after I swapped it. It had some problems I remember, but I have since put in the correct ECU, and done a few other MISC. things. I unhooked the positive terminal on the battery for about 20 mins while i ate dinner, thinking this would clear the ECU codes and it should run right. Again, i havent had it out since the swap. Anyway, I come back out after dinner, and its still doing the same thing.
    I figured the problem before was the outdated d16 ecu. Now, IM at a loss, i have tried cleaning the IACV. Nothing. Any suggestions as to what this might be, and a quick way to attempt to fix it before i take it in to have the codes checked? Thanks.
    Oh, and shortly ill post up a video of what im talking about, im waiting for it to be cleared by youtube.
     
  2. Matts96HB

    Matts96HB . Moderator VIP

    Messages:
    6,483
    Likes Received:
    390
    Joined:
    Apr 16, 2006
    Heres the vid..

    YouTube - LS problems

    the vibrating noise was a metal plate sitting on the dash, dont mind it :p
    any help is appreciated
     
  3. Matts96HB

    Matts96HB . Moderator VIP

    Messages:
    6,483
    Likes Received:
    390
    Joined:
    Apr 16, 2006
    Anyone?
    Im at a loss here.
    Tried just about everything.
     
  4. Matts96HB

    Matts96HB . Moderator VIP

    Messages:
    6,483
    Likes Received:
    390
    Joined:
    Apr 16, 2006
    Never mind. Got this problem fixed.
    Pinout was done incorrectly :p
    Put the IACV blue/black wire into the wrong slot, lmao
     
Verification:
Draft saved Draft deleted

Share This Page