1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

LS/Vtec Swap

Discussion in 'HYBRID -> EG-EK / DC' started by freddycivic, Nov 3, 2005.

  1. freddycivic

    freddycivic Member

    Messages:
    46
    Likes Received:
    0
    Joined:
    Nov 3, 2005
    Location:
    Saint John, New Brunswick
    I'm doing a LS/Vtec swap in my 97 Civic (D16Y8). I wanted to use my stock harness for the swap and run the wires I needed to make the swap complete, but the LS/Vtec motor is OBD1 and my current harness
    is obviously OBD2. Is this possible? Or should I just get a OBD1 harness or a OBD2 to OBD1 conversion harness?

    Thanks
     
  2. TPR

    TPR Junior Member

    Messages:
    19
    Likes Received:
    0
    Joined:
    May 7, 2004
    Obd2 to Obd1 Harness is the easiest..

    or you can keep your existing harness & add a crank sensor to the lsvtec & be good to go.
    but you will need to re-wire your new alternator, fuel injectors, dizzy, all electronics...

    best to use the jumper harness

    we have them in stock ready to ship!

    $115 shipped.
     
Verification:
Draft saved Draft deleted

Share This Page