1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

ls/vtec

Discussion in 'Integra' started by integraboomer, Aug 21, 2011.

  1. integraboomer

    integraboomer New Member

    Messages:
    54
    Likes Received:
    0
    Joined:
    Jul 16, 2011
    I have an ls/vtec swap in my 97 integra. the head is an obd1 b16 pr3 i beleive. anyways i noticed today when i open the hood while it was running that it sounds like the head is ticking? its not very loud but noticable. is this normal or should i look deeper into it? I though maybe alot of these b series have the sound im hearing but im not sure. any info on this would be appretiated. thanks!
     
  2. E_SolSi

    E_SolSi Member of the 20 nut club Moderator VIP

    Messages:
    30,029
    Likes Received:
    3,956
    Joined:
    Sep 28, 2002
    Location:
    CT
    a certain amount of ticking is pretty normal

    tough to say whether yours is or not over the internet
     
  3. Rammus

    Rammus New Member

    Messages:
    103
    Likes Received:
    4
    Joined:
    Jul 25, 2011
    Location:
    MN
    A little ticking is normal usually the injectors firing (its a noticeable tick that I have seen a lot of people mistake for thinking there oil is low.) If it sounds like it's coming from around the fuel rail that's gonna be the injectors if not. I'd say check the oil level if it's low that could be it as well those would be the easy fixes that I know of.
     
  4. integraboomer

    integraboomer New Member

    Messages:
    54
    Likes Received:
    0
    Joined:
    Jul 16, 2011
  5. integrars

    integrars New Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Aug 22, 2011
    Im new to this don't know if I'm doing this right...I have a 91 integra...I wanted to ask what would be a good way to make it faster..?? Any ideas would be great
     
  6. integraboomer

    integraboomer New Member

    Messages:
    54
    Likes Received:
    0
    Joined:
    Jul 16, 2011
    You need to start your own thread for this question.
     
Verification:
Draft saved Draft deleted

Share This Page