1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

making the injectors work

Discussion in 'Forced Induction' started by t3t4si, Nov 12, 2003.

  1. t3t4si

    t3t4si Member

    Messages:
    81
    Likes Received:
    0
    Joined:
    May 28, 2003
    I finally got a hold of some dsm 440cc injectors. Does anyone know what all i need to make them work on a b16. dsm(peak and hold) b16(saturated)
     
  2. MaliWho97

    MaliWho97 Senior Member

    Messages:
    568
    Likes Received:
    0
    Joined:
    Jan 16, 2003
  3. GSRCRXsi

    GSRCRXsi Super Moderator Moderator VIP

    Messages:
    9,623
    Likes Received:
    345
    Joined:
    Nov 13, 2002
    Location:
    MD
    you need to either wire in some 10 ohm resistors or get your hands on a resistor box out of a 88-91 CRX.
     
  4. Del Slw

    Del Slw Member

    Messages:
    61
    Likes Received:
    0
    Joined:
    Sep 30, 2003
    Location:
    Cincinnati, OH
    the 10hm resistors are what i used. its like $2 for a box of 2 at radio shack. all you have to do, is follow the wires coming from your injectors, and cut ONE yellow wire at a time, and solder a resistor for eack yellow wire, there's 4.
     
  5. t3t4si

    t3t4si Member

    Messages:
    81
    Likes Received:
    0
    Joined:
    May 28, 2003
    ok thanks for the help guys ....i have them in and working
     
Verification:
Draft saved Draft deleted

Share This Page