I got a b18b full swap with hasport mounts and b16sir tranny and pr4 computer. My question is do I hook up the 2nd o2 sen. to c8 at the ecu like on a b16 swap? My car is a 90' crx si. Also I'm gonna get some ctr pistons and high revving valve spings, Whats a good cam set-up for this motor?
mini gone. b18b in need to know..........
- Thread starter wannabjdm
- Start date
- Replies 2
- Views 1K
We may earn a small commission from affiliate links and paid advertisements. Terms
red91efhatch
New Member
the PR4 is only going to look for 1 O2 sensor.
honds solo
New Member
thats basicly what i did to my b18 before i put it in the crx
execpt the vavle springs .
i run bc stage 2 type cams in mine cant remember what duration it was [was a little more stock spec] .
polished up the head to go with it .and a valve job to it.
ran pr3 pistons
and some bolt ons.
anyway i liked the more umph it had than the wore out d16 it once had.
now im going to play with the basemaps on it and see what else i can do .
and i done all that stuff by self which was aslo fun.
execpt the vavle springs .
i run bc stage 2 type cams in mine cant remember what duration it was [was a little more stock spec] .
polished up the head to go with it .and a valve job to it.
ran pr3 pistons
and some bolt ons.
anyway i liked the more umph it had than the wore out d16 it once had.
now im going to play with the basemaps on it and see what else i can do .
and i done all that stuff by self which was aslo fun.