1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

minime o2 help

Discussion in 'Civic and CRX - EF' started by ibdalovely1, Sep 27, 2009.

  1. ibdalovely1

    ibdalovely1 New Member

    Messages:
    99
    Likes Received:
    1
    Joined:
    Sep 3, 2006
    Location:
    dayton ohio
    ok i need some help with the o2 sensor on my mini me
    running a p28 a6 block z6 head in a 89 civic dx
    my question is im a cheap a$$ and i bought my o2 on egay so theirs no plug just 4 wires ive got the outputs for them but dont know where to put them on the harness
    on the harness 02 plug it looks like
    __-__ <clip at the top
    1 2
    3 4
    1 brown/blk line
    2 blk/gray stripe
    3 brown gray stripe white line
    4brown with gray stripe
    stripe = <>
    line = ^
    and the o2 i have is
    purple=
    white=
    black=
    gray=
     
    Last edited: Oct 2, 2009
  2. ibdalovely1

    ibdalovely1 New Member

    Messages:
    99
    Likes Received:
    1
    Joined:
    Sep 3, 2006
    Location:
    dayton ohio
    ok i dug up the info from when i bought it and this it the output why dose it have 2 heater wires
    oe heater white=black=black=brown=white
    oe heater white=black=black=brown=red
    oe signal black=blue=white=purple=black
    oe ground gray=white=green=tan

     
  3. ibdalovely1

    ibdalovely1 New Member

    Messages:
    99
    Likes Received:
    1
    Joined:
    Sep 3, 2006
    Location:
    dayton ohio
    i found out why it has 2 heater wires ones + the others -
    i got it wired up and its fine now
     
Verification:
Draft saved Draft deleted

Share This Page