1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Mounts help?

Discussion in 'HYBRID -> ED-EF / DA' started by Jhonda, Aug 5, 2003.

  1. Jhonda

    Jhonda Member

    Messages:
    71
    Likes Received:
    0
    Joined:
    Dec 25, 2002
    Location:
    Arkansas
    is the mount for the cable b16a1 tranmission the same as for the b16a2 i need a mount for my a1 transmission to bolt up to my 94 del sol si and i dont want to buy a $150 mount from hasport ,forget that {polished and pretty} who cares i need somthin to do a swap. i figured there has to be a mount hasport hasnt been around forever swaps have been goin a lot longer than that {rip off} company
     
  2. Jhonda

    Jhonda Member

    Messages:
    71
    Likes Received:
    0
    Joined:
    Dec 25, 2002
    Location:
    Arkansas
    ??? help??
     
  3. Mr.Steve

    Mr.Steve Junior Member

    Messages:
    14
    Likes Received:
    0
    Joined:
    Aug 5, 2003
    Yes they are differnat. If you want to put that tranny in your ride a mount is needed.
     
  4. xj0hnx

    xj0hnx I wanna be sedated VIP

    Messages:
    14,172
    Likes Received:
    48
    Joined:
    Nov 10, 2002
    Location:
    C.C.TX.
    Why are you using a cable tranny in a Sol? Swap it out for a hydraulic, and use the right systems to operate it.
     
  5. lovinhonda

    lovinhonda Junior Member

    Messages:
    16
    Likes Received:
    0
    Joined:
    Jan 27, 2003
    The mounts are different, I found a hydro mount at Place Racing for my CRX and my hydro tranny...good luck.
     
  6. HondaMoCo

    HondaMoCo Senior Member

    Messages:
    322
    Likes Received:
    0
    Joined:
    Jan 8, 2003
    Location:
    lancaster/palmdale So Cal
    naa there isnt a stock mount that fits (why else would Hasport rip you off for one), you can either get a welder and make one for yourself, or try and modify the cable mount, or pay Hasport.
     
Verification:
Draft saved Draft deleted

Share This Page