My Dream B18 Setup!

We may earn a small commission from affiliate links and paid advertisements. Terms

Take a look at my dream B18C setup!

CP Pistons
JE Rings
Ferrea Seat Locator
Ferrea Alloy Valves
Ferrea Locks
Ferrea Springs
Ferrea Titanium Retainers
Port and Polish
Ferrea Roller Rocker
ARP Bolts
Copper SCE Head Gasket
Ferrea Bumpsticks w/ 308 Intake and 312 Exhaust
Holley Fuel Rail
JG Edelbrock Victor X-Series Intake Manifold
RC Engineering (8)1200cc Peak and Hold Injectors
Holley Integra Billet 62mm Throttle Body
Moroso Crank Bolt
Race Engineering Rage Cam Sprockets
Turbonetics T70 Cermaic Ball Bearing Turbo

:worthy:
 
You'd keep the stock rods, huh? That's pretty brave considering you want to flow almost a liter of fuel per minute into your engine. Oh well, good luck.

:bash:
 
No
I would get Forged rods, and I got that setup out of Honda Tuning Magazine...
They had 4 Primary 550cc and 4 Secondary 800cc and they switched to a single set of primary 1200cc injectors.

They got 536.2Hp and 361.1lb-ft Trq at 7800rpms

They were using a dart b18 block too... I dont think Dart blocks are legal for daily driving though

Later!
 
Sup! That's a nice setup there homie, but how much will it cost? You must be rich or something huh? hehe. Anyway, if you could get that setup I think you would be running pretty good on the track nor street. aight lataz
 
Back
Top