1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

My SIR2 Swap

Discussion in 'HYBRID -> EG-EK / DC' started by honda_power69, Oct 20, 2002.

  1. honda_power69

    honda_power69 Member

    Messages:
    77
    Likes Received:
    0
    Joined:
    Oct 7, 2002
    Just wanted to let you guys know. I was able to figure out all the wiring using AllData diagrams (even though it took more than 1 1/2 weeks, 6 hours a day to wire it all up. (Sir2 into a 96 Civic DX Coupe). I'll be writing up wiring diagrams after I get the car running, still lack my radiator hoses, having the ecu converted from auto. to man. and oil/coolant. We hooked up the scanner with KOEO (key on engine off) and all the sensors on in the data section were reading correctly. I'll let you guys know how it turns out. Should be done by Tuesday, week after next.
     
  2. stpracer

    stpracer Senior Member

    Messages:
    126
    Likes Received:
    0
    Joined:
    Sep 28, 2002
    Location:
    Grove City, Pa.
    Wow lots of work - hope all turns out ok......
     
Verification:
Draft saved Draft deleted

Share This Page