1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Need help on b20b swap please!,

Discussion in 'HYBRID -> EG-EK / DC' started by siesmic, Apr 22, 2008.

  1. siesmic

    siesmic New Member

    Messages:
    13
    Likes Received:
    0
    Joined:
    Nov 6, 2006
    Hi my name is Alex and i just recently bought a 1994 eg honda civic with blown motor on it. (so basicly its just a shell) I am new to honda's and i am looking foward to get this baby on the street. so someone please help me. :)

    Anyways, i am looking to buy a b20b motor and get it installed by one of my friends mechanic. And i am not looking to go vtec yet until i have plenty of cash to work with. I just want to buy it and swap it in for now. Basicly i want to make this swap as simple as possible(cause of the money). Why did i chose the b20b? because l8ter on i might decide 2 go turbo, and my friend told me a b20b ran nice on boost. With that said l i am also unsure what tranny i should go with & what other extra parts besides b series motor mounts will i need to complete the swap?


    Someone please help me make a list of the parts that i need so i can get this car on the street :(

    Thanks alot. :cool:
     
  2. siesmic

    siesmic New Member

    Messages:
    13
    Likes Received:
    0
    Joined:
    Nov 6, 2006
    sorry for the bad grammar lol.
     
  3. BrutalB83

    BrutalB83 Brutal Moderator Moderator VIP

    Messages:
    11,620
    Likes Received:
    302
    Joined:
    Jun 24, 2006
    Location:
    Rochester Hills, MI
    Try searching, and do some reading in the FAQ/Reference section. B-series swaps into Civics have been covered many, many times here.

    Also, in the future, try actually reading and researching reputable sources rather than just going off of what your buddies tell you...
     
  4. siesmic

    siesmic New Member

    Messages:
    13
    Likes Received:
    0
    Joined:
    Nov 6, 2006
    Turns out ive searched multiple times and every search resulted in fidings like the following.

    B20b VTEC Swap
    B20b Problems
    B20b with B16 Head
    B20b Swap On 1998 Civic
    B20b Swap on 1990 Crx
    B20b question

    And if you actually "READ" i don't want to go VTEC.

    SO Don't post on MY THREAD if you can't read , and when instead of telling me not to run out posting what my buddies told me then maybe you should ask your self what a DISCUSSION FORUM is and GOOGLE it. You should not mind me asking some questions and if you do then you should have just hit the back button on your browser and ignored my THREAD you DUMB ***K.

    But no you want to be KNOWN as the *NOOB CRUSHER* So far your a DUCK with alot of post to me because you did not help me out with anything and now i know that if im looking for HONDA related questions then your not the SOURCE you DICK HEAD.


    END OF THREAD
     
  5. Dark93DX

    Dark93DX New Member

    Messages:
    466
    Likes Received:
    2
    Joined:
    Apr 26, 2007
    Location:
    B.C.
  6. Dark93DX

    Dark93DX New Member

    Messages:
    466
    Likes Received:
    2
    Joined:
    Apr 26, 2007
    Location:
    B.C.
    Thats a bad attitude to have around here, ppl get pissed b/c these questions get posted over and over again.
     
  7. siesmic

    siesmic New Member

    Messages:
    13
    Likes Received:
    0
    Joined:
    Nov 6, 2006
    Let them get pissed thats why this is a discussion forum. For anyone that doesnt like what i posted.... well you know what im about to say.... Go to a HAPPY PLACE!

    Anyways i got all the information i need, so this THREAD CAN BE CLOSED before people start rolling in complaining and i go kakutz on them.


    THANK YOU DARK93DX your alot more helpful then that other IGNORANT JERK
     
    Last edited: Apr 23, 2008
  8. mikeyg323

    mikeyg323 New Member

    Messages:
    82
    Likes Received:
    0
    Joined:
    Mar 16, 2008
    I wouldnt boost the B20 too much either if left stock
     
  9. BrutalB83

    BrutalB83 Brutal Moderator Moderator VIP

    Messages:
    11,620
    Likes Received:
    302
    Joined:
    Jun 24, 2006
    Location:
    Rochester Hills, MI
    I'm a duck???

    Ok...

    Anyhoo, looks like Dark93DX was able to find the exact info you were looking for by checking the FAQ section. You couldn't be bothered to look there first?

    Also, I didn't say jack shit about VTEC, so stop putting words in my mouth. And don't tell me that I didn't read your post. I read everything that I respond to; I probably read through posts more carefully than a lot of people on here do. All that I said was that the subject of B-series swaps (the basic gist of how to do them) has been covered many, many times here, and that you should research first before believing what your buddies tell you.

    Like mikeyg323 said, I'd be careful about boosting a stock B20B. It's basically just a bored out LS, so the sleeves are thinner and thereby weaker. Just make sure you keep the boost at a reasonably low level and get it tuned well...you fuckin' douchebag...
     
    Last edited: Apr 24, 2008
  10. Matts96HB

    Matts96HB . Moderator VIP

    Messages:
    6,482
    Likes Received:
    389
    Joined:
    Apr 16, 2006
    I really don't see how you keep your cool sometimes, Brutal.

    This thread pisses me off. B-Series swaps are all the same in a sense. The only difference is the wiring for VTEC, which you don't have to worry about.

    Do some searching first next time, idiot.
    Sure, its a discussion forum, but HONESTLY, open your eyes.
     
  11. siesmic

    siesmic New Member

    Messages:
    13
    Likes Received:
    0
    Joined:
    Nov 6, 2006
    Normally i would not reply to the IDIOT remark but since your running your dick sucker here you go ( I just opened my eyes)

    FUCK YOU have and have a nice day.
     
    Last edited: Apr 24, 2008
  12. BrutalB83

    BrutalB83 Brutal Moderator Moderator VIP

    Messages:
    11,620
    Likes Received:
    302
    Joined:
    Jun 24, 2006
    Location:
    Rochester Hills, MI
    Did you even read my response? I doubt it. If you were any kind of a reasonable person at all you'd be cool about this by now, but clearly you've got a stick up your ass. I gave you some decent advise, so take it or leave it...

    By the way, I thought you were done with this thread?
     
    Last edited: Apr 24, 2008
  13. BrutalB83

    BrutalB83 Brutal Moderator Moderator VIP

    Messages:
    11,620
    Likes Received:
    302
    Joined:
    Jun 24, 2006
    Location:
    Rochester Hills, MI
    Meh...he's not worth a giant rant...sometimes just a few selective calm remarks are more effective anyway...
     
  14. siesmic

    siesmic New Member

    Messages:
    13
    Likes Received:
    0
    Joined:
    Nov 6, 2006
    I am done with this thread and thank you for the "advice" but the last remark i made was not towards you.

    Lets just leave it at that.
     
  15. Matts96HB

    Matts96HB . Moderator VIP

    Messages:
    6,482
    Likes Received:
    389
    Joined:
    Apr 16, 2006
    People like you make me laugh.

    You come into a forum full of information, and the first thing you do is post a new thread asking for help on something that is already covered in the reference articles very well. I'm sure I could come up with at least 50 links to pages that have a decent description of what parts are needed for a B-Series swap into your car.

    Lets say you didn't know that all B-Series engines require the same mounts, shift linkage, etc.

    You would have known that had you read the reference articles first.

    You probably wouldn't have posted this thread in the first place had you read those articles first. All of the above questions would have been answered.
     
  16. siesmic

    siesmic New Member

    Messages:
    13
    Likes Received:
    0
    Joined:
    Nov 6, 2006
    Your awesome @ giving me more post do you know that ;)

    Anyways thank you for taking your time on this thread :D
     
Verification:
Draft saved Draft deleted

Share This Page