1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Need help with h23 swap!!! please

Discussion in 'Accord' started by wrenchface, Jun 28, 2007.

  1. wrenchface

    wrenchface New Member

    Messages:
    1
    Likes Received:
    0
    Joined:
    Jun 28, 2007
    Ok so i just finished swapping a 95 usdm h23a1 into my 90 accord. This is the first time i ever did a honda swap. Everything looks great but i cant get it to start. Ive checked all the fuses and grounds, and its getting fuel, i havent been able to check and see if its getting spark cause ive been working by myself all day. (don't have an extra hand to turn it over while i check to see if its firing.) What i noticed is the oem harness on the accord only has 7 wires for the dizzy and the h23 has 8 for the dizzy? Am i supposed to run an extra wire to the ecu or is this supposed to work how it is. Please help me! ive already sold my old car to buy the swap and im running out of time i need to get this car back on the road asap! Any other advise some one could give would be be appreciated ! thanks
     
  2. frannk_theshit

    frannk_theshit New Member

    Messages:
    3
    Likes Received:
    0
    Joined:
    Mar 6, 2008
    you need to get the new wiring nd hte computer of the prelude to put it in ther accord
     
  3. nootrac22

    nootrac22 Well-Known Member VIP

    Messages:
    4,331
    Likes Received:
    131
    Joined:
    Mar 16, 2007
    Location:
    exeter pa
    prelude ecu = P14
     
  4. BrutalB83

    BrutalB83 Brutal Moderator Moderator VIP

    Messages:
    11,620
    Likes Received:
    302
    Joined:
    Jun 24, 2006
    Location:
    Rochester Hills, MI
    Both of you fail. This thread is nine months old.
     
Verification:
Draft saved Draft deleted

Share This Page