1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Need help with Vtec...............

Discussion in 'ECU's, Electronics, and Tuning' started by civicboyz, Jun 2, 2004.

  1. civicboyz

    civicboyz Junior Member

    Messages:
    11
    Likes Received:
    0
    Joined:
    Jun 2, 2004
    I need some help with my 92 Honda Civic Hatchback DX.
    I recently threw in a D16A motor, single cam vtec.
    I bought a p28 ecu and I need to know how to wire it up.
    I ran 3 wires from the vtec mechanism, 2 from the vtec switch
    and one from the vtec solenoid. I tried to go by the Chilton's manual,
    but the color of the wires was different from mines.
    Where would I hook up the 2 switch and 1 solenoid wires to on the
    p28 ecu? Which color wire or pin number on the ecu should I hook
    it up to in order for the vtec to work?
    Any help would greatly be appreciated.
     
  2. civicboyz

    civicboyz Junior Member

    Messages:
    11
    Likes Received:
    0
    Joined:
    Jun 2, 2004
    Someone please help!
     
  3. lsvteccrx

    lsvteccrx Senior Member

    Messages:
    112
    Likes Received:
    0
    Joined:
    Mar 30, 2004
    Location:
    new york
    Vtec sol.-A4
    vtec pressure-D6
    Vtec pressure (ground the black wire)
     
Verification:
Draft saved Draft deleted

Share This Page