1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

need to know what to do with big vacume

Discussion in 'HYBRID -> EG-EK / DC' started by TWISTEDIMAGE, Mar 13, 2005.

  1. TWISTEDIMAGE

    TWISTEDIMAGE Senior Member

    Messages:
    806
    Likes Received:
    0
    Joined:
    Jan 11, 2005
    Location:
    CASPER WYOMING
    do not have the port on my throttle body to hook it to please help asap
     
  2. UDT

    UDT Senior Member

    Messages:
    2,015
    Likes Received:
    0
    Joined:
    Sep 24, 2003
    Location:
    california
    Your gonna have to give us more info......IE what tb and engine and all that.
     
  3. xj0hnx

    xj0hnx I wanna be sedated VIP

    Messages:
    14,172
    Likes Received:
    48
    Joined:
    Nov 10, 2002
    Location:
    C.C.TX.
    Well, you could remove it alltogether and plug all the fittings. or just plug the end of the one hose and tuck it away.
     
  4. TWISTEDIMAGE

    TWISTEDIMAGE Senior Member

    Messages:
    806
    Likes Received:
    0
    Joined:
    Jan 11, 2005
    Location:
    CASPER WYOMING
    93 cx with 00 b16a2 swap complete my charcol canister has a big hose and two smaller ones the big one does not conect to the throttle body on the 00 si motor my cx motor had a port for it on the throttle body and the 00 si does not can i plug it and have no problems or cel
     
  5. deth101

    deth101 Senior Member

    Messages:
    774
    Likes Received:
    0
    Joined:
    Mar 17, 2003
    Location:
    usa
    in the book it just goes to a purge valve and if 92b16vx says you can plug it I'd try it,John's always been right for me[he's one of the guys that helped me big time when most everyone else said I couldnt use a 98 gsr harness].
     
Verification:
Draft saved Draft deleted

Share This Page