1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

noob here help!

Discussion in 'HYBRID -> ED-EF / DA' started by crexfan, Dec 8, 2003.

  1. crexfan

    crexfan Junior Member

    Messages:
    3
    Likes Received:
    0
    Joined:
    Dec 8, 2003
    hy guys i'm new here i want to know if i can find any info here on swaping a
    dohc zc in a 1g crx si.i want to know before i start asking any questions. :unsure:
     
  2. MXDesa

    MXDesa Senior Member

    Messages:
    927
    Likes Received:
    2
    Joined:
    Apr 19, 2003
    Location:
    Queens, New York
    Hi welcome, there is plenty of info from past forums that cover parts of that swap. It may take a little bit of time and searching to come up with something but use the search option on the Forum page and im sure u will find something useful. Best of luck
     
  3. crexfan

    crexfan Junior Member

    Messages:
    3
    Likes Received:
    0
    Joined:
    Dec 8, 2003
    thanx MXdesa i'l see if i can dig up something :)
     
  4. jlicrx

    jlicrx Senior Member

    Messages:
    1,891
    Likes Received:
    65
    Joined:
    Jun 5, 2003
    Location:
    Colorado Springs
    you will need the brown valve cover ZC from 86-87 JDM Integra - need transmission, intermediate shaft, axles, knuckles/hubs, shift linkage from 86-89 USDM Integra - ECU from 86-87 USDM Integra (not 88-89) - use your Si engine harness
     
  5. crexfan

    crexfan Junior Member

    Messages:
    3
    Likes Received:
    0
    Joined:
    Dec 8, 2003
Verification:
Draft saved Draft deleted

Share This Page