1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

noob in need of help

Discussion in 'HYBRID -> EG-EK / DC' started by Myles, Nov 27, 2009.

  1. Myles

    Myles New Member

    Messages:
    1
    Likes Received:
    0
    Joined:
    Apr 7, 2008
    i currently have an mb6 civic and in the new year i am getting a dc2 engine i know it will bolt in the same as my original engine. but my question to you all is the wiring. i am getting confused:confused:! is it a simple plug and play as i will be getting the ecu and engine wiring loom or is there a little cut and soldering needed?
    cheers for your help
    myles
     
  2. B18EFHatch

    B18EFHatch New Member

    Messages:
    49
    Likes Received:
    0
    Joined:
    Nov 21, 2009
    Location:
    Pittsburgh, PA
    You currently have the b18c4 motor. and you are putting in a B18c5 which is the USDM DC2 Acura Integra Type-R motor. Both are obd2 and you have the p72j ecm which is what should have came in your civic. So you should be a plug and play setup.
     
  3. namoper

    namoper New Member

    Messages:
    32
    Likes Received:
    0
    Joined:
    Jul 29, 2008
    Your mb6 ecu plugs are ob1 which will cause a problem. You will need to get an obd1 to obd2 conversion harness.
     
Verification:
Draft saved Draft deleted

Share This Page