1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

noob wit a eh2

Discussion in 'Civic and del Sol - EG and EK' started by JDM B20 EH2, Jul 23, 2006.

  1. JDM B20 EH2

    JDM B20 EH2 Junior Member

    Messages:
    56
    Likes Received:
    0
    Joined:
    Jul 21, 2006
    Location:
    Russellville AR
    [​IMG]

    1993 CX

    Engine:
    Jdm B20
    Itr tranny
    Act heavy duty pressure plate and street stip disk
    Injen intake
    K&N air filter
    Mugen oil cap
    NGK iridium plugs
    Comptech header and high-flo cat
    Custom 2.5in Cat Back
    Aluminum cam seal

    Suspension:
    Apexi ws full coil-over dampers for Jdm Itr
    Jdm Itr rear Lca's
    Integra rear sway bar
    Rear tie bar
    Front and rear strut bars
    Rear disk brake conversion (try that with no key to get wheels off pain in the butt)

    Interior:
    Blue to black conversion consistin of:
    Integra dash
    Integra seats
    Gsr cluster
    Integra carpet
    All black interior panels
    Bride steering wheel
    Jdm Integra airbag deletion tray
    Integra double bend shifter
    Power window conversion
    Power locks conversion

    Exterior:
    Ctr rear lip

    Rims:
    Rear 17" RsLimitied concept pros
    Front 15" rota circuit 8's (as soon as i get a key to get the konigs off)

    Sound system:
    Pioneer head unit
    Alpine amp
    Rockford Fosgate 12
    Polk speakers


    will add more when i figure out everything

    http://www.clubcivic.com/board/showthread.php?t=88732
     
  2. phunky.buddha

    phunky.buddha Admin with a big stick Admin VIP

    Messages:
    28,465
    Likes Received:
    228
    Joined:
    Sep 30, 2002
    Location:
    Dallas / Fort Worth, TX
    Welcome to HondaSwap! Looks like you have a good start. What are your plans for the exterior?
     
  3. JDM B20 EH2

    JDM B20 EH2 Junior Member

    Messages:
    56
    Likes Received:
    0
    Joined:
    Jul 21, 2006
    Location:
    Russellville AR
    ctr front and rear lip
    new accord nighthawk black
    jdm heads and tails and that about it
    maybe a carbon hood not shure yet
     
  4. phunky.buddha

    phunky.buddha Admin with a big stick Admin VIP

    Messages:
    28,465
    Likes Received:
    228
    Joined:
    Sep 30, 2002
    Location:
    Dallas / Fort Worth, TX
    Cool. I was wondering more about the paint than anything else. ;)
     
  5. JDM B20 EH2

    JDM B20 EH2 Junior Member

    Messages:
    56
    Likes Received:
    0
    Joined:
    Jul 21, 2006
    Location:
    Russellville AR
    lol yeah nighthawk black i think thats the one its the new black with a blue pearl
     
  6. don_radeon

    don_radeon Bored

    Messages:
    151
    Likes Received:
    0
    Joined:
    Jul 19, 2006
    Leave it looking like crap, that's the best.
     
  7. JDM B20 EH2

    JDM B20 EH2 Junior Member

    Messages:
    56
    Likes Received:
    0
    Joined:
    Jul 21, 2006
    Location:
    Russellville AR
    right now im makein integra door panels fit im almost done with the just have a few lil details to work out.
     
  8. JDM B20 EH2

    JDM B20 EH2 Junior Member

    Messages:
    56
    Likes Received:
    0
    Joined:
    Jul 21, 2006
    Location:
    Russellville AR
  9. don_radeon

    don_radeon Bored

    Messages:
    151
    Likes Received:
    0
    Joined:
    Jul 19, 2006
    Fitment looks okay. I don't know why you'd even bother having door panels if you're going to be drag racing..
     
  10. JDM B20 EH2

    JDM B20 EH2 Junior Member

    Messages:
    56
    Likes Received:
    0
    Joined:
    Jul 21, 2006
    Location:
    Russellville AR
    its a everyday driver.
     
  11. VTECin5th

    VTECin5th Administrator

    Messages:
    2,182
    Likes Received:
    4
    Joined:
    Apr 17, 2005
    Location:
    Phoenix Az
    Not everyone is speed racing around town, some enjoy having the car inside the car.
    I like your sig, that's pretty true.
     
  12. JDM B20 EH2

    JDM B20 EH2 Junior Member

    Messages:
    56
    Likes Received:
    0
    Joined:
    Jul 21, 2006
    Location:
    Russellville AR
    here are some pics of my custom strut bar. also changed the system around a lil. also nice to have welders and drill presses and everything.

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  13. phunky.buddha

    phunky.buddha Admin with a big stick Admin VIP

    Messages:
    28,465
    Likes Received:
    228
    Joined:
    Sep 30, 2002
    Location:
    Dallas / Fort Worth, TX
    Very nice! Solid bar with no joints = good.
     
  14. JDM B20 EH2

    JDM B20 EH2 Junior Member

    Messages:
    56
    Likes Received:
    0
    Joined:
    Jul 21, 2006
    Location:
    Russellville AR
    im makein a custom solid one piece aluminum one for the front too. wedlin everythin up on it. no bolts.
     
  15. don_radeon

    don_radeon Bored

    Messages:
    151
    Likes Received:
    0
    Joined:
    Jul 19, 2006
    Why not try fixing the body work and painting it? Mr. Daily-Driver?

    btw I have that same series sub in my car. Low the old-school HE Punch's.
     
  16. JDM B20 EH2

    JDM B20 EH2 Junior Member

    Messages:
    56
    Likes Received:
    0
    Joined:
    Jul 21, 2006
    Location:
    Russellville AR
    im goin to i have just got to wait on a friend to be readay for it to come to his house im only primerin it right now and im goin to paint it when i get to fl. i need a lil help with some body work on it. im shure i can do it but i would rather a lil help just to make shure i do it right. and i caint drive right now anyways no lic. the sub was a freebie. but im goin to get a cerwin vega 10 and a new box after i get to fl. i have a few thing to take care of first. i was drivein it til i went to jail for drivein on suspended not im doin all this as is sits.
     
  17. don_radeon

    don_radeon Bored

    Messages:
    151
    Likes Received:
    0
    Joined:
    Jul 19, 2006
    Too bad about the sub, that series is rare and if you were to try to buy it again nowadays you'd have to get one of the top-top series from Rockford Fosgate. C/V makes good speakers but I would never pump a 10".

    Side note: Practice typing sometime.
     
  18. JDM B20 EH2

    JDM B20 EH2 Junior Member

    Messages:
    56
    Likes Received:
    0
    Joined:
    Jul 21, 2006
    Location:
    Russellville AR
    there was a hatch with 2 of the new vega 10s and it vibrated the whole building. with only a 600watt vega amp. heres a link to their site on this sub. Cerwin Vega check out the vmax subs.

    bad ass sub. plus at cost i can get a huge deal on it threw the shop.
     
  19. don_radeon

    don_radeon Bored

    Messages:
    151
    Likes Received:
    0
    Joined:
    Jul 19, 2006
    Dude, it's 'through' not 'threw'. 'threw' is past tense for 'throw'. Just a little FYI for next time.

    Nah man, big deal.
    2 10"'s don't match up with one 12", but two 12"s will sound like thunder outside. You want apocalypse now? Get two 12" Kicker Komp VRs and you'll hear what real bass sounds like.

    I only pump Infinity Amps, Polk Speakers, and Kicker subs.
     
  20. JDM B20 EH2

    JDM B20 EH2 Junior Member

    Messages:
    56
    Likes Received:
    0
    Joined:
    Jul 21, 2006
    Location:
    Russellville AR
    im runnin polk speakers. im not lookin for major bass though and im not wantin a whole lot of space or weight.
     
Verification:
Draft saved Draft deleted

Share This Page