1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

OBD 0 ecu's

Discussion in 'ECU's, Electronics, and Tuning' started by MikeBergy, Jun 21, 2005.

  1. MikeBergy

    MikeBergy Blah blah blah....

    Messages:
    3,646
    Likes Received:
    1
    Joined:
    Oct 9, 2003
    Location:
    Central Coast, CALI
    Okay, I have a 91 integra and so had a pr4 ecu in it. I bought a socketed pm6 modified with a datalogging port. It should just plug in without any problems, right? it is running the same engine, I am just wanting to make sure whether or not I need to reassign some of the pins on the harness plugs. Please jump in with your comments/experiences. TIA
    Mike
     
  2. B16RacerN2NR

    B16RacerN2NR Working Hard VIP

    Messages:
    6,148
    Likes Received:
    99
    Joined:
    Feb 28, 2003
    Location:
    Moving back West...
    No, it will plug in perfectly fine. No re-pinning needed.
     
  3. MikeBergy

    MikeBergy Blah blah blah....

    Messages:
    3,646
    Likes Received:
    1
    Joined:
    Oct 9, 2003
    Location:
    Central Coast, CALI
    That is what I thought, thanks.
     
  4. pissedoffsol

    pissedoffsol RETIRED

    Messages:
    49,693
    Likes Received:
    53
    Joined:
    Sep 28, 2002
    Location:
    Retirement Home
    yep- shjould be fine.

    pm6 = d16a6 si motor
    pr4 = ls b18a motor

    once chipped, it won't matter
     
Verification:
Draft saved Draft deleted

Share This Page