1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

obd 2 help

Discussion in 'ECU's, Electronics, and Tuning' started by daredevil2283, Feb 15, 2008.

  1. daredevil2283

    daredevil2283 New Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Feb 15, 2008
    i am a noob here but might find help i have a 00ex turbo 8psi boost (obd2b)and i am trying to switch over to an obd1 so i can use a p28 chipped ecu the thing is in limp mode wont let me go pass 4000rpm's i have a jumper harness , the thing is that even without a chipped p28 ecu i still cant run the p28 ecu in here
     
  2. custompainter

    custompainter drive it like U stole it

    Messages:
    597
    Likes Received:
    4
    Joined:
    Jan 16, 2007
    Location:
    central CT
    thinking that the IAC on the the y8 is different then the one from the z6 other then that there shouldn't be a problem p28 is a obd1 ecu so it doesn't need a CKF sensor or a Knock sensor .......

    i have a 99 dx with a y8 swap i did the whole turbo thing
    if you need any help let me know
     
  3. daredevil2283

    daredevil2283 New Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Feb 15, 2008
    yeah man it is a y8 w/2 wire iacv but still no luck now i have the car not reving over 5000rpm and i have the slightest idea why also no knock or crank sensor on. thanks for the help
     
Verification:
Draft saved Draft deleted

Share This Page