1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

obd b18c issues

Discussion in 'HYBRID -> EG-EK / DC' started by 95coupeGSR, Oct 23, 2012.

  1. 95coupeGSR

    95coupeGSR New Member

    Messages:
    3
    Likes Received:
    0
    Joined:
    Oct 22, 2012
    little back story really fast, i have a obd1 95 civic i swapped a B18c obd1 gsr into it and i'm running an obd1 p72 ecu. every thing's great except a code 9 :(. i was told iacv which i installed a new one...still had code, then i was told crank angle postion sensor which is in the dizzy. before i put down more cash would changing the dizzy help? i've turned to those who have swapped more than i. this was my first and i'm going insane. thanks so much for your time.
     
  2. Briansol

    Briansol Admins Admin VIP

    Messages:
    21,456
    Likes Received:
    2,117
    Joined:
    Nov 18, 2007
    Location:
    CT
    9 is crank angle sensor/cyl position (cyp). It is in the dist. If you have a freind with one, swap for a bit to see if it clears it up on your car, and breaks his in the process.
     
  3. 95coupeGSR

    95coupeGSR New Member

    Messages:
    3
    Likes Received:
    0
    Joined:
    Oct 22, 2012
    thanks man lol. i'll just pick up a cheapo from flea bay and go from there
     
Verification:
Draft saved Draft deleted

Share This Page