OBD injector difference?

We may earn a small commission from affiliate links and paid advertisements. Terms

90sihatch

Senior Member
I was reading a writeup and read that the obd1 injectors are different than obd0. I got my motor from a 92 ls (obd1) but I am running it obd0 with the 92 injectors in it. The car doesn't feel like its running to it's full potential, but it doesn't run horrible either, so what do you think?
 
Quoted post[/post]]
Yup, if you have obd0 inj, and have a box, thats a problem

Think you may have got this round the wrong way. My b16a1 (obd0) used low impedance injectors and so had a resistor box. When I put in my b16b, it uses the CTR injectors which are high impedance so I wired the resistor box out. The easy way to check is to measure the resistance of your injectors. If they measure about 2 ohms, they need a resistor box, if they measure about 11, then they don't.
 
[quote name='clanny' date='Dec 7 2005, 02:56 PM' post='624314']
[quote name='droppedcrxsi' post='623634' date='Dec 6 2005, 04:20 AM']
Yup, if you have obd0 inj, and have a box, thats a problem
[/quote]


Yeah, what ryan meant was obd1 injectors and have a box thats a problem.
 
Back
Top