1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

obd1 b16a swap in 91 dx

Discussion in 'HYBRID -> ED-EF / DA' started by C-Bye, Oct 4, 2005.

  1. C-Bye

    C-Bye Member

    Messages:
    46
    Likes Received:
    0
    Joined:
    Jul 16, 2005
    Location:
    Minnesota
    just got the swap started, but throwing a code, 9? chilton says cyp? that is in the dizzy correct? I have two wires ran from the ecu clip, c1 and c2, through the firewall connected to two wires into the dizzy. I have obd0 to obd1 jumper. request knowledge?
     
  2. brian11to1

    brian11to1 Senior Member

    Messages:
    9,203
    Likes Received:
    21
    Joined:
    Jan 9, 2003
    yes, its in the distributor. I believe you might just have the two wires swtiched. if not, try with a known NO CODE distributor. but reset the codes first.
     
  3. C-Bye

    C-Bye Member

    Messages:
    46
    Likes Received:
    0
    Joined:
    Jul 16, 2005
    Location:
    Minnesota
    alright, now I swapped the wires around, still the same problem, doesn't want to start, idles ok but u hit the gas wants to die.

    2 codes present,
    #4-ckp
    #9 cyp
    [​IMG]
     
Verification:
Draft saved Draft deleted

Share This Page