1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

OBD1 conversion

Discussion in 'HYBRID -> ED-EF / DA' started by loserpunkx182, Aug 8, 2005.

  1. loserpunkx182

    loserpunkx182 Senior Member

    Messages:
    250
    Likes Received:
    0
    Joined:
    Aug 6, 2005
    Location:
    PA
    i just recently brought a wiring harness and a obd1 p72 that was socketed for hondata. the guy had the ecu chipped for his turbo but i only have bolt ons. i was wondering if he took the chip out and just keep the socket in would the ecu return to normal operation so that i could just plug and play like stock? or is there a jumper that i have to jump to return it to stock?

    also is there any problem going from my p72obd2 to p72 obd1 that i have to worry about?
     
  2. drpenguin

    drpenguin Senior Member

    Messages:
    498
    Likes Received:
    0
    Joined:
    Aug 25, 2004
    Location:
    Salem, Or
    if its chipped. you will have to remove the custom chip. get a new one tuned to your car. and put it in. it has to have a chip in it with a map on it. as far as i know it wont run with out a chip.
     
Verification:
Draft saved Draft deleted

Share This Page