1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

obd2 b18c1 in a 93 del sol with a p28

Discussion in 'ECU's, Electronics, and Tuning' started by b18c1delsol, May 20, 2009.

  1. b18c1delsol

    b18c1delsol New Member

    Likes Received:
    May 20, 2009
    st louis
    ok i have a 93 del sol that i built a b18c1 for fully built 70 trim turbo but i have a p28 under the dash my engine is obd2 it looks like the person that did the swap orginal took a obd 1 harness and a obd2 harness and cut the connectors for the distribotor and the altnator off the obd2 harness and wired them into the obd1 harness is this ok to do this or what iv got abot 10,000 in this motor and dont want to plug it up and it blow on the dyno can u help please
Draft saved Draft deleted

Share This Page