obd2 b18c1 into 96 ek hatch. i want to keep it obd2 but need a harness

[integra41042]

i have a b18c1 out of a 98 integra gsr and i want to put it in my 96 civic dx hatch. I have the original harness for the gsr but the ek is way differnet. I know i will probably have to put a couple prongs into the plugs at the ecu for vtec, thats not a problem. I need the rest of the harness for the motor where it goes all the way to the ecu through the firewall.

please let me know if you can help of even if you have a harness for sale. I have a obd2 p73 ecu ready to plug in, i also have the stock gsr ecu I could use. I really just dont want to go to obd1 cause i have bothe these obd2 ecu's ready to go.

 

[thecarguy82]

HYBRID: 6G Tech

hope that helps.

 

[allanjoker]

i have the similar question...but mine is just on the dizy.
2000 ek was 0bd2,rewired for 0bd1. now swaped another newer jdm motor. everything wires up but i need to rewire the dizy/wire (two connection-0bd1) back to one connection 0bd2....please if anybody can show me where i can a lil diagram