1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

obd2 gsr swap into eg, do i need a jumper

Discussion in 'HYBRID -> EG-EK / DC' started by broadway7272, Mar 11, 2007.

  1. broadway7272

    broadway7272 Junior Member

    Messages:
    80
    Likes Received:
    0
    Joined:
    Jun 17, 2006
    the real question is below
     
    Last edited: Mar 11, 2007
  2. broadway7272

    broadway7272 Junior Member

    Messages:
    80
    Likes Received:
    0
    Joined:
    Jun 17, 2006
    vtec and knock sensor wiring

    sorry about that guys,
    just answered my own question online. now for the real question does someone have detailed instructions for wiring the vtec and knock sensor. i'm going to use an obd1 computer with an obd2 engine.
    thanks
     
  3. sprjit22

    sprjit22 New Member

    Messages:
    22
    Likes Received:
    0
    Joined:
    Oct 16, 2006
    well maybe you should get an obd1 engine harness & repin the dizzy to obd1 to take care of that problem. Ill look for the pics or wiring vtec.
    [​IMG]
    [​IMG]
     
    Last edited: Mar 12, 2007
  4. sprjit22

    sprjit22 New Member

    Messages:
    22
    Likes Received:
    0
    Joined:
    Oct 16, 2006
    if the shell you have is not a 92 any model or a 93-95 ex then it will not be wired for vtec & the plug in the pic above will be empty in the 2 slots for vtec solenoid & vtec pressure switch..
     
  5. broadway7272

    broadway7272 Junior Member

    Messages:
    80
    Likes Received:
    0
    Joined:
    Jun 17, 2006
    thanks,
    i saw this somewhere before and couldn't find it again. this was exactly what i was looking for.
     
Verification:
Draft saved Draft deleted

Share This Page