1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

ok any ideas

Discussion in 'Accord' started by BEARHONDATECH, Apr 11, 2011.

  1. BEARHONDATECH

    BEARHONDATECH New Member

    Messages:
    3
    Likes Received:
    0
    Joined:
    Apr 11, 2011
    i work for a honda dealer in s.c i have a 2000 civic with a d16z single cam the owner states that the motor is a 93 still has 2000 intake with a leak at #4 intake port going to remove manifold and check gasket fit around port any problems i should be aware of ive been in the independent automotive world for 25yrs now and never really got into hot rodding but i love a good problem
     
  2. efhondakid

    efhondakid My name is Byron. VIP

    Messages:
    7,034
    Likes Received:
    202
    Joined:
    Mar 2, 2007
    Location:
    Akron-Canton, Ohio
    Shouldnt have any issues,pull the old gasket put the new gasket on it and run it.
     
  3. BEARHONDATECH

    BEARHONDATECH New Member

    Messages:
    3
    Likes Received:
    0
    Joined:
    Apr 11, 2011
    ok heres the fix above the main port there is a small port drill to fit a small ball bearing seal with sealer then set the hole with a small center punch around the edges
     
Verification:
Draft saved Draft deleted

Share This Page