1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

ok SOMEONE plZ! hepl!

Discussion in 'HYBRID -> ED-EF / DA' started by sinezter, May 13, 2007.

  1. sinezter

    sinezter New Member

    Messages:
    113
    Likes Received:
    0
    Joined:
    Mar 29, 2007
    if finished the zc swap and it wont start! we got it runing off of starter fluid but it seems to not be getting gas, we got gas all the way to the fuil rail but i dont beleive the injecters are shooting the gass... i had to do the dpfi to mpfi and maby i messed up somewere?! PLZZZZ somebody help me fix this!
     
  2. Taco15

    Taco15 I wear stretchy pants VIP

    Messages:
    6,998
    Likes Received:
    203
    Joined:
    Jan 11, 2005
    Location:
    Tallahassee Fl
    def. sounds like wiring. check the injectors and follow the main power wires. see where you messed up.
     
  3. sinezter

    sinezter New Member

    Messages:
    113
    Likes Received:
    0
    Joined:
    Mar 29, 2007
    ok i redid the wireing, and the samething, it dosnt seem to b getting past the injectors... im not sure maby i did mess up, but i just redid the whole wireing and still cant get gas to the cylinders, wat should i do?

    i ran one wire from each injector to the proper ecu pin, and the red/black wire from each injector to the inj. resisor box, and the yellow/black from the inj. resisor box to A15... and im sure thats right, but still nothing... is it possible that the inj. resistor box isnt working? or something
     
    Last edited: May 13, 2007
  4. sinezter

    sinezter New Member

    Messages:
    113
    Likes Received:
    0
    Joined:
    Mar 29, 2007
    what nobody else has any answers?
     
  5. clanny

    clanny Member

    Messages:
    174
    Likes Received:
    0
    Joined:
    Oct 20, 2004
    Location:
    Scotland
    I take it you've checked that your injectors are low or high resistance and added a resistor box in if they are low? Low is about 2.5 ohms, high is about 12 ohms.
     
  6. sinezter

    sinezter New Member

    Messages:
    113
    Likes Received:
    0
    Joined:
    Mar 29, 2007
    ok no i have not done that, so how do i check if they are high or low? and how will i know what inj. resistor box to get? because the one i got was from a 89 civic si i do beleive
     
  7. jlicrx

    jlicrx Senior Member

    Messages:
    1,891
    Likes Received:
    65
    Joined:
    Jun 5, 2003
    Location:
    Colorado Springs
    do you have the ground wires connected at the thermostat housing?
     
Verification:
Draft saved Draft deleted

Share This Page