1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

OK WTF LS Dizzy on my b16??

Discussion in 'HYBRID -> ED-EF / DA' started by Samuels, Apr 15, 2005.

  1. Samuels

    Samuels Senior Member

    Messages:
    251
    Likes Received:
    0
    Joined:
    Feb 16, 2005
    Okay I got a 91 LS dizzy for my gen 1 b16. I know I needed to cut off a leg so I cut the right side off from the top which would'nt let it go on. Now to the WTF, I can only put the top bolt in it. The 2nd on the left side does'nt lineup right so I have 1 freaking bolt in it and that can't be safe longterm.

    I think the ignitor was bad can I just transer the parts to my b16 dizzy housing??

    And why can't I buy a oem dizzy that fits for this motor???
     
  2. B16RacerN2NR

    B16RacerN2NR Working Hard VIP

    Messages:
    6,148
    Likes Received:
    99
    Joined:
    Feb 28, 2003
    Location:
    Moving back West...
    you can't buy an OEM one because there are no USDM obd-0 b16's...you could get one from distributorking.com tho...but as far as your LS dizzy, 1 bolt is fine...i only run 1 bolt on my b16 dizzy...it doesn't leak or anything. i use only one bolt because i'm always fucking with the timing at the track.

    EDIT:you can use 88-91 Si or 90-91 teg ignitor, coil, cap and rotor. they are the same
     
Verification:
Draft saved Draft deleted

Share This Page