1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

P28 Ecu Chip

Discussion in 'ECU's, Electronics, and Tuning' started by 95a2civic, May 1, 2003.

  1. 95a2civic

    95a2civic Junior Member

    Messages:
    27
    Likes Received:
    0
    Joined:
    Apr 23, 2003
    just wonderin how hard it is to chip an ecu. ;)
     
  2. SleEPeR_CRX

    SleEPeR_CRX Senior Member

    Messages:
    1,226
    Likes Received:
    0
    Joined:
    Dec 22, 2002
    Location:
    Vancouver B.C. canada
    I advise to not put it in yourself, all the resistors and small bits are easily wrecked, and unless you know alot about electronics, i suggest taking it to a place that knows what they are doing and will do it for like 50 bucks. might cost more but you know its not fucked.
     
  3. CRX-YEM

    CRX-YEM Super Moderator Moderator VIP

    Messages:
    4,623
    Likes Received:
    54
    Joined:
    Sep 29, 2002
    Location:
    Wallingford, CT
    You'll have to de-solder the eeprom from the circuit board. Unless you are very good with a soldering iron I suggest you don't do it yourself.
     
Verification:
Draft saved Draft deleted

Share This Page