Panducky Motorsports Massive Used Parts Sale (Motec, Mugen, OEM, and More!)

We may earn a small commission from affiliate links and paid advertisements. Terms

ComposiMo

Junior Member
DSC_9144.JPG

---------------------------------------------------------------------


DriverFX Racing Seat Never Installed! (no rails) - $120
DSC_0727.JPG


4 15x6.5 4x100 Rota Slipstreams w/o tires - $300
Wheel1
DSC_0698.JPG

Wheel2
DSC_0699.JPG

DSC_0702.JPG

Wheel3
DSC_0704.JPG

DSC_0705.JPG

Wheel4
DSC_0708.JPG

DSC_0709.JPG


PR3 Mugen Chipped Ecu - $150
DSC_0715.JPG

DSC_0711.JPG

DSC_0712.JPG


EDM CRX Steering Wheel (Germany Origin) - $200
DSC_0716.JPG


Set of 90-91 Crx Si seats (typical driver tear,pass rail only) - $150
DSC_0804.JPG

DSC_0805.JPG

DSC_0806.JPG


D-series turbo manifold (ram horn style, ready for any flange/waste flange you want [will install those flanges]) - $750 (new)
DSC_9137.JPG


EDM Crx wing - $215
DSC_0763.JPG

DSC_0764.JPG


Ground control coilovers eibach springs in the rear, skunk2s in the front, one of the skunks has a cut thru just over half of one spring (88-91 crx) - $185
DSC_0766.JPG

DSC_0772.JPG


Crx radiator w/ fan - $60
DSC_0756.JPG

DSC_0757.JPG


B16 stock cams - $50
DSC_0743.JPG


MSD blaster coil (new) - $30
DSC_0742.JPG


Neuspeed Rear lower tie bar (needs ends) Crx - $20
DSC_0734.JPG


Neuspeed rear strut bar Crx - $150
DSC_0733.JPG


Integra Cluster Bezel - $20
DSC_0761.JPG


Tuner Toys oil feed tap for turbo or ls/vtec - $15
DSC_0795.JPG


B16 crank - $70
DSC_0728.JPG

DSC_0729.JPG

DSC_0730.JPG

DSC_0731.JPG

DSC_0732.JPG


B-series oil pan - $20
DSC_0752.JPG


Moroso Blue Ignition Mystery Box - $45
DSC_0744.JPG

DSC_0745.JPG


B16 oem JDM 2-piece header - $Make Offer
DSC_0735.JPG


B-series alt - $175
DSC_0737.JPG


B16 stock bare block - $75
DSC_0773.JPG

DSC_0775.JPG

DSC_0776.JPG

DSC_0777.JPG

DSC_0778.JPG

DSC_0779.JPG

DSC_0780.JPG
 
B16 bare with golden eagle sleeves (needs a hone job may need a bore job) - $750
DSC_0782.JPG

DSC_0783.JPG

DSC_0784.JPG

DSC_0785.JPG


Blank YS1 tranny case ready for any hydro gear set - $125
DSC_0787.JPG

DSC_0788.JPG


Zex 4cyl Nitrous kit direct port wet kit - $550
DSC_0758.JPG

DSC_0759.JPG


Turbo Smart E-boost boost controller no solenoid - $250
DSC_0755.JPG


Autometer oil temp gauge (no sender) - $30
DSC_0753.JPG


Autometer water temp gauge (no sender) - $30
DSC_0754.JPG


Ys1 Cable tranny (known to be fine but not guaranted) - $375
DSC_0789.JPG

DSC_0791.JPG


S1 Cable tranny (known to be good and no grinds) - $400
DSC_0792.JPG

DSC_0794.JPG


00-01 TypeR Intake Cam, 92-93 GSR Exhaust Cam (Cam gears in pic are not included!) - $300
DSC_0738.JPG


Motec M4 W/Custom wiring harness built by motec including motec ignition expander, M&W CDI ignition box, Custom mercury marine coil pack, Magnetic cam trigger (Tony1 Style) (includers cam gear), 2 sets of custom built plug wires for honda b-series, Lambda and logging activated (includes wide band sensor) - Only $4,000obo (retail value of package new is $6k plus) (was on car for about 3 months before owner decided to part out the entire car).
DSC_9143.JPG

DSC_9138.JPG

DSC_9139.JPG

DSC_9140.JPG

DSC_9141.JPG

DSC_9142.JPG

DSC_0741.JPG


50cc Pit Bike - $350
DSC_0800.JPG


JDM RHD Bolt in cage for CRX (Main hoop only pictured. Dorr bars, and rear down bars included) - $325
DSC_0796.JPG

DSC_0797.JPG



- More coming soon!!!

Pictures coming soon and most are obo. We can accept credit card (Visa/MC) over the phone (MUST ship to billing address!!!) or paypal (verified addresses ONLY) as well.

Panducky Motorsports Inc.
4220 Dow Rd
Melbourne, FL 32934
321-254-0990

Ask for either John or Kevin.

Thanks!


:ph34r:
 
good luck, I sold a Hydro tranny from a 94 D16Z6 for 160 shipped, in perfect condition. 400 for a CRX trans is rediculous. I paid 225 for mine and that was a rip off.
 
Trannys and a few other of these items are on consignment, and thats what the owner wants for em.. :shrug2:
 
good luck, I sold a Hydro tranny from a 94 D16Z6 for 160 shipped, in perfect condition. 400 for a CRX trans is rediculous. I paid 225 for mine and that was a rip off.

you're a dumbass.. an S1 is a JDM b16 tranny and can easily go for $400.. thats actually cheap.. know what you're talking about before you open your mouth and try and shit on someones thread
 
Back
Top