1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

please help error code 15, 20

Discussion in 'ECU's, Electronics, and Tuning' started by joe2dmax, May 16, 2005.

  1. joe2dmax

    joe2dmax Junior Member

    Likes Received:
    May 16, 2005
    im getting error code 15 =Ignition Output Signal
    Missing or defective ignition output signal

    and error code 20 which is =Electrical Load Dectector
    Defective cicuit or unplugged/defective sensor

    im a newbie on hondas and was wondering what i need to check to fix this problem. The car is a crx with a zdyne ecu, (also tried a stock pm6 to start the car but was unlucky)

    triple checked all the wiring and still not getting spark or fuel pressure.

    please help. i need the car to run soon :(
Draft saved Draft deleted

Share This Page