1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Prelude Wiring Harness Auto to Std

Discussion in 'Prelude' started by nautique196, Nov 5, 2007.

  1. nautique196

    nautique196 New Member

    Messages:
    13
    Likes Received:
    0
    Joined:
    Apr 10, 2007
    Hi all, just swaped out my blown 2.3 with another from a junkyard. My car is an Auto and the junker was a stick and they left the wiring harness intact. so instead of unplugging and repluggini just left that one pluged in. well there seems to not bee the same wiring harness. am i just not finding the connections or is there a difference and should i swap back to the original auto wiring harness.
     
  2. BrutalB83

    BrutalB83 Brutal Moderator Moderator VIP

    Messages:
    11,620
    Likes Received:
    302
    Joined:
    Jun 24, 2006
    Location:
    Rochester Hills, MI
    What year is your car? What year was the car you pulled the motor from? They switched to OBD2 in 96, so if either your car or the junker car is a 96 and the other isn't, then that might be the problem.

    Either way, you will probably want to use the harness and accessories from your old motor.
     
  3. nautique196

    nautique196 New Member

    Messages:
    13
    Likes Received:
    0
    Joined:
    Apr 10, 2007
Verification:
Draft saved Draft deleted

Share This Page