Project Greenrio

Briansol

Admins
Admin
VIP
i didn't realize it wasn't working...

There's a new software version i need to upgrade to.... just haven't had time. it will likely fix that bug.
 

TurboMirage

YEEAAAHHH
VIP
the threaded rod trick worked great I have everything mounted in the car now just to tighten everything up and work on he hubs.

411C48AD-F638-42CE-BF45-2B93A175E5EB.jpeg
72A0424C-8870-4C9E-A0CC-1FCD3B8A8C15.jpeg
 

TurboMirage

YEEAAAHHH
VIP
I got to watch some lemons at the speedway today while I was golfing :)

I know it doesn’t look it but the car is loweredn and the rims are very gold.
 

TurboMirage

YEEAAAHHH
VIP
Well it’s back in the garage.

I busted tools trying to get the damn axles out of the other knuckles so I’m going to rehab them another time. Luckily the busted ass axle tool popped this side free quick and easy. Everything is loose already so I’ll start removing the knuckle tomorrow

7E9F21D4-322F-467B-837A-CA00530CFDF7.jpeg
 

TurboMirage

YEEAAAHHH
VIP
Other side... looks awesome but I had to cut one of the brake caliper bolts so I’ll deal with that later. The bearings on this side were absolutely crushed but the races were firm.

The spacer that is supppsed to go In between the bearings is 1.5mm larger than the lip at best. Wtf lol

34BF2E15-D3E7-4036-B60A-2BD9F2BB3525.jpeg
 

TurboMirage

YEEAAAHHH
VIP
I ordered spacers earlier in the week. 2-3 week wait I called all dealers within 75 miles no spacers. They fucking shipped from Maynard MA today. Wtf. Stupid car.
 

TurboMirage

YEEAAAHHH
VIP
This is a process lol I got one done. I have to shave down the huge spacers and I’m doing it by hand. I got one down pretty far but it needs more work. I three the other knuckle and it was a quick fit. The bolt let go around 130lbft and it was within rolling resistance at 120. I think 150 on the car will be just fine.

C4DFABFD-2028-41E8-8D52-75CD66A7BDBD.jpeg
A1AA101A-0AAC-4701-B8AA-552F7B62C06A.jpeg
C62FCFAA-9F90-4106-8EF4-8F638B2EA4C0.jpeg
3EF3E287-0770-4527-A53B-41BADD9D8A67.jpeg
 

TurboMirage

YEEAAAHHH
VIP
ended up crushing the donor car knuckles trying to get the axles out. oh well.... 8-10 hours of work down the drain. going to start finishing up the knuckles from the car tonight.
 
Top